Hyper-Sonic Nozzles



Boost Cooler 20µ atomising Hyper-Sonic-nozzles with different flow rates for the Boost Cooler system, including 80µ fine mesh filter.


The Hyper-Sonic nozzle is the worlds best selling, most advanced, and easiest to use water-meth nozzle. Constructed out of methanol resistant stainless steel, the patented Hyper-Sonic? design spins the fluid to supersonic levels before forcing it through a venturi shaped orifice to create the “Hyper-Sonic” 20 micron droplet mist that has become the industry leader in water-methanol technology.

Complete with a 80 micron filter, the Hyper-Sonic nozzle can be cleaned and re-used on any application. To unlock power hidden within your water-methanol injection system replace your nozzles with Hyper-Sonic nozzles today. It’s the last water-methanol injection nozzle you will ever need to buy.

The key to water injection is how fine the fluid droplets are upon injection. The smaller the droplets, the more total surface area per volume injected which results in more heat reduction = more power. Because of this fact, more cooling can be done with less fluid. More of the intake charge can be filled with cold O2 – not water

To use our nozzles, you need our Boost Cooler nozzle holder (art.no. SP30202). The nominal flow data relate to 100 psi pump pressure, the pump can deliver up to 300 psi, so the actual flow can be 20-25% higher, take this into account when choosing the size.

Additional information

Weight 0.25 kg

Snow Performance


There are no reviews yet.

Be the first to review “Hyper-Sonic Nozzles”

Your email address will not be published. Required fields are marked *

Automerk Model Jaar
Automerk Model Jaar