EGR endplate 16v/20v intake side

€11.95

Description

EGR endplate, made from 3mm stainless steel. This can be applied with a removed EGR valve, where the plate is not inbetween two existing flanges but used as an endcap.
Fits the intake manifold of the euro 3-4 JTD 1.9 16v and 2.4 20v engines.
For proper sealing this plate should be mounted with an additional EGR gasket.

Additional information

Weight 0.08 kg
Manufacturer

Reviews

There are no reviews yet.

Be the first to review “EGR endplate 16v/20v intake side”

Your email address will not be published. Required fields are marked *

Automerk Model Jaar Motor
Automerk Model Jaar Motor
Alfa Romeo 147 2000-2004 1.9 JTD 16v (140hp)
Alfa Romeo 147 2004-2010 1.9 JTDm 16v (136/150hp)
Alfa Romeo 147 2004-2010 1.9 JTDm 16v (170hp)
Alfa Romeo 156 1997-2003 1.9 JTD 16v (140hp)
Alfa Romeo 156 2003-2007 1.9 JTD 16v (140hp)
Alfa Romeo 156 2003-2007 1.9 JTD 16v (150hp)
Alfa Romeo 156 2003-2007 2.4 JTD 20v (163hp)
Alfa Romeo 156 2003-2007 2.4 JTD 20v (175hp)
Alfa Romeo 159 2005-2010 1.9 JTDm 16v (136/150hp)
Alfa Romeo 159 2005-2010 2.4 JTDm 20v (200hp)
Alfa Romeo 159 2005-2010 2.4 JTDm 20v (210hp)
Alfa Romeo 159 2005-2010 2.4 JTDm 20v Q4 (210hp)
Alfa Romeo 159 2011-2012 1.9 JTDm 16v (136/150hp)
Alfa Romeo 159 2011-2012 2.4 JTDm 20v (210hp)
Alfa Romeo 159 2011-2012 2.4 JTDm 20v Q4 (210hp)
Alfa Romeo 166 2003-2007 2.4 JTDm 20v (175hp)
Alfa Romeo 166 2003-2007 2.4 JTDm 20v (185hp)
Alfa Romeo Brera/Spider 2006-2011 2.4 JTDm 20v (200hp)
Alfa Romeo Brera/Spider 2006-2011 2.4 JTDm 20v (210hp)
Alfa Romeo GT 2004-2010 1.9 JTDm 16v (136/150hp)
Alfa Romeo GT 2004-2010 1.9 JTDm 16v (170hp)
Fiat Bravo 2007-2012 1.9 16v MultiJet (150hp)
Fiat Stilo 2001-2006 1.9 JTD 16v (140hp)
Fiat Stilo 2001-2006 1.9 JTD 16v (150hp)
Lancia Thesis 2002-2008 2.4 JTD 20v (175hp)
Lancia Thesis 2002-2008 2.4 MultiJet 20v (185hp)

Related products